Muffler

Safety equipment for reducing emission noise from compressed air, industrial gases and steam. Such as safety valve control valve discharge, pipe system steam, air discharge, as well as boiler start-up discharge, blowdown and pipeline purge discharge. It is suitable for gas discharge, and can also be used for gas-liquid mixture discharge, high temperature liquid discharge flash and other occasions. Compared with conventional mufflers, JX series mufflers have the advantages of small size and large noise reduction value, which can save investment and reduce space occupation, and is one of the best noise reduction products for gas emission systems in petrochemical and electric power industries.

The control of middle and high frequency noise should be based on the silencer with resistance and impedance.

The control of low and medium frequency noise should be based on the silencer with the combination of resistance and impedance.

The micro-perforated plate muffler should be used to control the noise of medium with high temperature and high humidity.

The noise of high-pressure gas emission is controlled by throttling step-down mufflers and small hole injection mufflers.

If the noise of the fan is generally displayed as high and medium frequency characteristics, the resistance or impedance compound muffler can be selected; The noise of air compressor is generally characterized by medium and low frequency characteristics, and resistance or resistance based impedance compound muffler can be used. Boiler steam venting and high temperature high pressure high speed venting are generally characterized by wide band characteristics and high noise intensity, and can choose throttling pressure diffusion and small hole injection silencer.

Due to the different equipment used in chemical, thermal and other industries, the specific working conditions are different, our company to provide users with muffler products, according to the specific situation of the noise reduction parts of the design, therefore, users in the selection of our products, need to provide the following data as a design basis:

1, Use: what kind of equipment (or part) and noise reduction form

2. State and basic parameters of noise reduction medium;

3. Rated parameters of the medium at the outlet of the exhaust pipe: flow rate, pressure, temperature;

4, Exhaust pipe structure parameters: pipe diameter, wall thickness, material, etc.

5. Connection method of muffler and pipe;

6, Muffler body support form;

7, There is no need to equip with rain cover.

8. Other relevant requirements.

Hot Tags: muffler, China muffler manufacturers, factory, budget friendly pipe support, interchangeable pipe support, extendable pipe support, bs pipe support, unbranded pipe support, csa pipe support