Paint, Packaging And Marking For Constant Force Spring Hangers

Jun 30, 2025

Leave a message

1. The threaded surface and the connection surface of the rotating parts should be coated with anti-rust oil (butter or acid-free industrial vaseline), and special protection should be considered for threaded parts to prevent damage.

2. Except for the nameplate and scale plate, each part of the hanger has a primer and a topcoat on the surface. The paint color is determined by the manufacturer according to domestic and foreign sales needs. If there are special anti-corrosion and other requirements, please indicate when ordering.

3. Avoid painting in the hot sun, rain, snow or dense fog. The snow, ice, oil and rust on the surface should be removed before painting.

4. After the hanger is painted, the paint film on the surface should be uniform, and there should be no defects such as bubbles, slag inclusions, cracks and peeling, wrinkles and variegated colors. If there are any above defects, they need to be repaired and qualified.

5. After the hanger test is completed, the nameplate should be stamped with the following information: hanger model, factory number, standard load value, maximum displacement value, pipe rack number, pipe section number and manufacturing date.

6. The constant force spring hanger must be packaged after the paint is dry and passed the inspection. It should be guaranteed to be rust-free within one year from the date of manufacture.

7. The packaging box should be accompanied by a product quality certificate and installation and use instructions.

Send Inquiry