Spring supports and hangers need to pay attention to quality issues. Spring supports and hangers have many uses in industry, so the quality should be reliably guaranteed so that people can buy and use them with confidence.
In fact, for products such as supports and hangers, you can see that they are widely used in the steam and water pipelines or boiler equipment industries of power plants. The power industry needs to use supports and hangers to balance displacement. It is precisely because spring supports and hangers can balance the displacement that the help for construction is greatly increased. Only in this way can the safety factor of the power industry be provided. The quality of spring supports and hangers is a guarantee. Only products with good quality will be needed in industry.
Regarding supports and hangers, we mainly produce pipeline supports and hangers, spring supports and hangers, constant force spring supports and hangers, etc. Today, we mainly introduce the uses, principles and inspection points of spring supports and hangers.
Use: Spring supports and hangers are load-bearing supports and hangers, used in places where the vertical displacement of pipelines is not too large, and play an important role in bearing pipeline loads, reducing pipeline vibrations, and reducing the thrust or torque borne by equipment. Principle: Spring supports and hangers directly use springs to bear pipeline loads, and the output force of spring supports and hangers is proportional to the deformation of the springs themselves.
Inspection points:
1. Whether the support and hanger locking device is released;
2. Whether the support and hanger is seriously corroded;
3. Whether the support and hanger is overloaded;
A: Whether the root auxiliary beam is deformed;
B: Whether the pipe is deformed;
C: Whether the spring support and hanger spring is compressed
4. Whether the support and hanger is unloaded; (Whether the hanger is loose and not under stress;)
5. Whether the hanger inclination angle exceeds 4°, and whether the inclination angle increases in the same direction when hot than when cold;
6. Whether the parallel spring support and hanger is overloaded or unloaded on one side;
7. Whether the locking nut is locked.
