What are the common failures of pressure vessels?

May 23, 2025

Leave a message

Yun Liu
Yun Liu
I am a mechanical design engineer specializing in pressure vessel manufacturing. My work involves creating detailed 3D models and ensuring compliance with international safety regulations for our heat exchangers and other vessels.

As a seasoned pressure vessel supplier, I've witnessed firsthand the various challenges and failures that these crucial industrial components can face. Pressure vessels are designed to hold gases or liquids at a pressure significantly different from the ambient pressure, and their proper functioning is vital for the safety and efficiency of numerous industrial processes. In this blog, I'll delve into the common failures of pressure vessels, shedding light on the causes, consequences, and preventive measures.

1. Material Degradation

One of the most prevalent issues leading to pressure vessel failures is material degradation. Over time, the materials used in pressure vessels can deteriorate due to various factors, including corrosion, erosion, and fatigue.

Corrosion

Corrosion is a chemical reaction that occurs when the metal in the pressure vessel comes into contact with a corrosive environment. This can be caused by factors such as moisture, chemicals, and even the presence of certain gases. For example, in industries where pressure vessels are used to store or transport chemicals, the likelihood of corrosion is significantly higher.

There are different types of corrosion, including uniform corrosion, pitting corrosion, and stress corrosion cracking. Uniform corrosion occurs evenly across the surface of the metal, gradually thinning the walls of the pressure vessel. Pitting corrosion, on the other hand, creates small holes or pits in the metal surface, which can lead to leaks and structural failure. Stress corrosion cracking is a more complex form of corrosion that occurs when a combination of tensile stress and a corrosive environment causes cracks to form in the metal.

To prevent corrosion, proper material selection is crucial. Using corrosion-resistant materials such as stainless steel or coating the interior of the pressure vessel with a protective layer can significantly reduce the risk of corrosion. Regular inspections and maintenance are also essential to detect and address any signs of corrosion early on.

Erosion

Erosion is the wear and tear of the pressure vessel's surface due to the impact of solid particles or high-velocity fluids. This can occur in industries where pressure vessels are used to handle abrasive materials or in applications where there is a high flow rate of fluids. For example, in mining operations, pressure vessels used to transport slurries can be subject to severe erosion.

Erosion can lead to thinning of the vessel walls, which can compromise the structural integrity of the pressure vessel. To prevent erosion, proper design and selection of the pressure vessel are necessary. Using materials with high resistance to erosion and incorporating features such as wear liners or erosion-resistant coatings can help minimize the effects of erosion.

Fatigue

Fatigue is a phenomenon that occurs when a pressure vessel is subjected to repeated loading and unloading cycles. Over time, these cycles can cause microscopic cracks to form in the metal, which can grow and eventually lead to failure. Fatigue failure is often characterized by sudden and catastrophic fractures, making it a particularly dangerous type of failure.

Factors that can contribute to fatigue failure include high stress levels, cyclic loading, and the presence of stress concentrations. To prevent fatigue failure, proper design and analysis of the pressure vessel are essential. Ensuring that the pressure vessel is designed to withstand the expected loading cycles and minimizing stress concentrations can help reduce the risk of fatigue failure. Regular inspections and monitoring of the pressure vessel's condition can also help detect any signs of fatigue early on.

2. Design and Manufacturing Defects

Another common cause of pressure vessel failures is design and manufacturing defects. These defects can occur during the design phase, the manufacturing process, or both.

Design Defects

Design defects can include issues such as incorrect sizing, improper selection of materials, and inadequate structural support. For example, if a pressure vessel is designed with insufficient wall thickness, it may not be able to withstand the internal pressure, leading to failure. Similarly, if the wrong material is selected for a particular application, it may not have the necessary properties to resist corrosion, erosion, or fatigue.

To prevent design defects, it is important to work with experienced and qualified engineers who have a thorough understanding of pressure vessel design. Conducting detailed engineering calculations and simulations can help ensure that the pressure vessel is designed to meet the specific requirements of the application.

Manufacturing Defects

Manufacturing defects can include issues such as welding defects, improper machining, and inadequate quality control. Welding defects, in particular, can be a major cause of pressure vessel failures. Poorly welded joints can create weak points in the pressure vessel, which can lead to leaks or fractures.

To prevent manufacturing defects, it is important to work with reputable manufacturers who have a proven track record of producing high-quality pressure vessels. Implementing strict quality control measures during the manufacturing process, including non-destructive testing and inspection, can help ensure that the pressure vessel meets the required standards.

3. Overpressure and Overheating

Overpressure and overheating are two other common causes of pressure vessel failures. These conditions can occur due to a variety of factors, including malfunctioning safety devices, process upsets, and human error.

Overpressure

Overpressure occurs when the internal pressure of the pressure vessel exceeds its design limit. This can be caused by factors such as blockages in the piping system, malfunctioning pressure relief valves, or sudden changes in the process conditions. Overpressure can lead to catastrophic failure of the pressure vessel, resulting in explosions, fires, and the release of hazardous materials.

Fin-tube Air Cooled Heat ExchangerTower Container

To prevent overpressure, pressure vessels are typically equipped with pressure relief valves that are designed to open and release excess pressure when it reaches a certain level. Regular maintenance and testing of these valves are essential to ensure that they are functioning properly. In addition, proper process control and monitoring can help prevent overpressure situations from occurring.

Overheating

Overheating occurs when the temperature of the pressure vessel exceeds its design limit. This can be caused by factors such as inadequate cooling, process upsets, or external heat sources. Overheating can lead to a variety of problems, including material degradation, loss of strength, and deformation of the pressure vessel.

To prevent overheating, pressure vessels are typically equipped with temperature sensors and cooling systems. Regular maintenance and monitoring of these systems are essential to ensure that they are functioning properly. In addition, proper process control and monitoring can help prevent overheating situations from occurring.

4. Inadequate Maintenance and Inspection

Inadequate maintenance and inspection are also common causes of pressure vessel failures. Pressure vessels require regular maintenance and inspection to ensure that they are in good working condition and to detect any potential problems early on.

Maintenance

Regular maintenance of pressure vessels includes tasks such as cleaning, lubrication, and replacement of worn or damaged parts. Neglecting these maintenance tasks can lead to a variety of problems, including corrosion, erosion, and mechanical failure.

To ensure proper maintenance of pressure vessels, it is important to develop a comprehensive maintenance plan that includes regular inspections, cleaning, and lubrication. Following the manufacturer's recommendations for maintenance and using qualified maintenance personnel can help ensure that the pressure vessel is properly maintained.

Inspection

Regular inspection of pressure vessels is essential to detect any potential problems early on. Inspections can include visual inspections, non-destructive testing, and pressure testing. Visual inspections can help detect signs of corrosion, erosion, and mechanical damage, while non-destructive testing can help detect internal defects such as cracks and flaws. Pressure testing can help ensure that the pressure vessel is able to withstand the required pressure.

To ensure proper inspection of pressure vessels, it is important to develop a comprehensive inspection plan that includes regular inspections at specified intervals. Following the manufacturer's recommendations for inspection and using qualified inspection personnel can help ensure that the pressure vessel is properly inspected.

Preventive Measures and Solutions

To prevent the common failures of pressure vessels, it is important to take a proactive approach that includes proper design, manufacturing, maintenance, and inspection. Here are some preventive measures and solutions that can help ensure the safe and reliable operation of pressure vessels:

  • Proper Design and Selection: Work with experienced and qualified engineers to ensure that the pressure vessel is designed to meet the specific requirements of the application. Select the appropriate materials and design features to resist corrosion, erosion, and fatigue.
  • Quality Manufacturing: Work with reputable manufacturers who have a proven track record of producing high-quality pressure vessels. Implement strict quality control measures during the manufacturing process to ensure that the pressure vessel meets the required standards.
  • Regular Maintenance and Inspection: Develop a comprehensive maintenance and inspection plan that includes regular cleaning, lubrication, and replacement of worn or damaged parts. Conduct regular inspections using non-destructive testing and pressure testing to detect any potential problems early on.
  • Proper Operation and Monitoring: Ensure that the pressure vessel is operated within its design limits and that proper process control and monitoring are in place to prevent overpressure and overheating situations.
  • Training and Education: Provide training and education to personnel who operate and maintain pressure vessels to ensure that they have the necessary knowledge and skills to perform their jobs safely and effectively.

At our company, we offer a wide range of high-quality pressure vessels, including Fin-tube Air Cooled Heat Exchanger, Tower Container, and High Temperature Tube Preheater(Heat Recovery System for Furnace). Our pressure vessels are designed and manufactured to meet the highest standards of quality and safety, and we offer comprehensive maintenance and inspection services to ensure their reliable operation.

If you are in the market for a pressure vessel or need assistance with maintenance and inspection, we invite you to contact us to discuss your specific requirements. Our team of experts is ready to help you find the right solution for your needs.

References

  • ASME Boiler and Pressure Vessel Code
  • API Standards for Pressure Vessels
  • NACE International Standards for Corrosion Prevention
  • ISO Standards for Pressure Vessel Design and Manufacturing
Send Inquiry